NETTY ELECTRONICS – est 2014  ******  SCROLL THROUGH THIS LIST to see what I have.

Solid State Radios and a few TUBE TYPE RADIOS  from the 1960s,  1970s and 80s — TRADES WELCOME ( I collect transistors ect)

—>> I also have
**MANUALS** from a set of CD roms (also some  service Bulletins AND RARE   ones ) just email me and I can look up
your requirements. ***** I offer many free lookup services ** my contribution to Amateur Radio fraternity ***


EMAIL LINK for me/mybiz  (SMALL one man- Basement Shop – Mini Warehouse !)
EMAIL ME FROM THIS LINK HERE  — 73 Earl VE3AB my email address is

TS-430S parts (circuit boards) parts can be pulled such as (listed below)— (I have several circuit boards someone
gave me — and I have some of the parts pulled and ready to go (tested pulled parts)

1N60_PULLS these are various pulls I have done or can do from a TS430S KENWOOD XSCEIVER – includes a matched quad D21 through D24 1N60_PULLS
2SK125 SK125 (SK125-4 perhaps) TS430S pulls  $1.25
3SK19GR qty 2 or 3  removed from a Kenwood TS430s board- x48-1370-00 IF UNIT BOARD has some parts removed when i got it )  tested $3.00 each (removed with Hakko Desoldering tool I have a very good hand held de-soldering tool that does a nice job) .
3SK73GR (K73GR)   removed from IF Unit junked TS430S board (other 3SK73GRs as well) stored in TS430S pulls1 bin K73GR $5 each
LOTS of other semiconductors I can remove (and then test) from these boards


KENWOOD TS830 AND TS820 —I will soon have a second TS830 in stock and Im going to work on both of them at the same time on the bench and try to get them both working. I plan to (probably) order in some spare parts for the 830 ie relays and electrolytic caps for re-capping .


Kenwood TS-820 – trimmer caps (–bottom adjust types)– I have ordered some in from Surplus Sales of Nebraska – $4 each w/$2 shipping (Canada)

Me and this other ham ordered some and they work well in TS820 and possibly other Kenwood Hybrids as well.


TEN TEC ARGONAUT 509 505 515          I have quite a few semiconductors and a few physical parts like knobs and connectors

TEN  TEC ARGOSY I have crystals and some parts available (no panel parts or knobs or panels or anything
HEATHKIT HR10b parts (most reasonable) — I have one junker radio to draw parts from
HW7 I have some of these parts available
SB200 AMP – complete unit needs to be evaluated – could be a good project (maybe not too much wrong with it) .. INQUIRE !
SBE34 JUNKER RADIO someone wanted the IF filter and I sold it to him but the rest of the parts are there.

IC720 Icom – I still have some parts remaining from a junked unit – the band switching assembly has been sold. Quite a few parts are still available however
including the OPTICAL encoder for the vfo tuning.
SOLD OCT 18-2018 : CONAR 500 basic Ham radio Novice Receiver .. I have a junker radio still intact. — THIS ONE I sold for $18 for
Radio Shack   TRC- 448 Realistic 40 ch. CB that the channel readout leds have burned out. Otherwise works great. for parts or maybe
restoration — does anyone have a good LED readout or a possible substitute one.. ID be interested.
Realistic TRC-219 – I have 2 of these 1.5 watt 3 channel hand held radios

REALISTIC TRC448 SSB/AM 40 CHANNEL – I HAVE 2 of these- one w/bad display (parts yes)

Navaho TRC-57 CB
REALISTIC TRC 451 ssb/am 21-1565 w/service manual possible part out or test and sell (inquire if interested)
REALISTIC (Radio Shack) quantity 2 – TRC-219 1.5w 3 channel Handheld radios for parts
BROWNING LTD (I had this one on the bench) the audio output is not present and I will be repairing this radio soon.
PACE 6 CHANNEL DESK MOUNTED CB BASE STN works on transmit — seems to be a problem in Receive

SBE CB18 (aka Sidebander III) crystals and a few other parts
TRC30A Navaho CB Realistic (cabinet is a 6.5 out of 10) seems to work though no af on rx  — final is C799 NEC,12 xtals
REALISTIC TRC-57 CB radio  for parts or fix up no power out on tx and no signals on the cb band so not sure abt rcv

SEARS cb (note to self: look up the model nr)
MAXCOM 21 w/nice microphone – for parts donor or I can sell it (maybe)
I have a Fichter Electronics Transtenna TR switch unit.. offers?? It is a rare item and I cannot beg borrow or steal a manual for
Heathkit HR1680 or HX1680 (the transmiiter top or bottom cover) has a slight dent on one edge (available cheap)
also HR10b cover and parts available
also SB104 top and bottom covers avail cheap
HG10B VFO for heathkit DX60 and maybe others.. all the parts are there
SB104 transceiver — some boards are gone but some are still available .. I HAVE parted this rig out.
HEATHKIT GR-78 (this item is spoken for)  ( I sold the 2 audio output transistors but the rest is all there– real nice and clean unit.

OLDER 2 METER FM RADIOS (note*** some have good transistors and FETs that I pull to use on other equipment) I sell used
pulled tested parts from older gear. (example: 2SK19GR ($1.75 each tested from the 1970s) non-phoney tested parts.

CB  RADIOs and Parts – (NOTE: I sell final output transistors (tested good ones) reasonable.
IC22s — ICOM oldies I have a few junked ones — I have quite a few crystals for them as well. I sell the crystals for $3 each tested
Kenwood TM721A for parts
OLD Wilson Handheld 2 mtr rig that I think still works.

ICOM IC230 older synthesized rig (part out or test and sell) inquire if interested
KENWOOD TR7200G Radio with some crystals for parts or maybe even to use
ALINCO DR-599 for parts or maybe fix up- email me if u are interested in it
REALISTIC PRO11 older 4 crystal sockets (one is 153.770)
OLD Kenwood TR-7625 2 meter rig JUNKER UNIT. all knobs still avail except one, pots, meter

FDK MULT 2700  for Oscar Satellite work. This radio works but does have a problem with the mechanics of the VFO (sticking) SSB/CW/FM


************** TRADES **** I trade old radios for small discrete components such as Transistors, ICs ect *** TRADES BEING SOUGHT !!!!!!


OLD CLEGG FM-27B (early synthesized FM 2 meter)  — it works a bit.. open to offers Pictures and furthur info can be made available


Kenwood TM-241 – this radio works but the memory backup battery no longer holds the memory. — I dont think this one has the CTCSS
REALISTIC PRO 6 SCANNER RECEIVER – HAD some crystals with it the radio does not work (maybe ok as a parts donor)
REALISTIC PRO27 SMALL handheld 2 crystal fm receiver.. could be useful and I think it works.

OLD WESTING HOUSE TUBE RADIO  MODEL 823 – the dial plate and mechanisms might be the most valuable part.
(pictures  can be made available) the dial window and mechanism currently is listed on ebay (you can see pics there)
Westinghouse tube radio parts – model 823 – I removed one of the coils for a fellow but many of the parts are still intact including the dial mechanism and the dial window with the calibration and frequency markings ect.  Also tubes are available.

RCA Victor Model 3-BX-671  type VS047 or equiv
— Portable multiband that uses low voltage tubes. Doesnt belong to me but a lady here in Elliot Lake has it and wants to sell it. Doesnt have audio (just hum) but does power up ok.


Heathkit MT-1 Cheyenne Xmtr & MR-1 Comanche Rcvr with HP20 power supply.. likely I will part this one out
the HP20 is working and kind of a rare unit
 I DO TRADES I swap radios/power supplies for old transistors and parts!


MOTOROLA MCX1000 Commercial VHF and/or UHF communications radio (mobile) qty 2 of these radios for parts. They have parts such as M1156 final output transistor — made in Malaysia 1989 – (genuine) not fake knockoffs. I have some of  the other major components listed in my big super list of  over 7,000 parts.


TRANSVERTER 70CM (440 MHZ BAND) 432-28-10-B – I can put this one on the bench and test it. Hasnt been used in awhile.

I SUPPLY MANUALS (PDF) —********       Free of charge      **********— I have some rare ones too (ie Palomar radios) !

NOTE: THAT I have the Service Manuals in PDF format on my computer if you need it write me 73 earl VE3AB

Motorola MAXAR 80 parts radio – I have 2 of them and one includes a long extension cord of some type with a 6 pin male cinch jones

I have an older Motorola mobile with 2 knobs and no ident that I can see but one of the crystals says MOXY (has some parts including final
and driver transistors which can be pulled and tested. (available cheap)
MOTOROLA COMPONENTS DISCRETE (transistors mainly) but I have other miscellaneous all in Motorola bags. Motorola Mocom stuff ect

Inquire with me or check the big 7,500+ parts list I have on my parts pages — THE  BIG SUPERLIST 2 PAGE BIG LIST

note: my email — clickable link — is in the header at the top of each page of my web site… 73 earl ve3ab (Netty Electronics)
My email is  – I would welcome any small discrete components like transistors,
ICs, AND OF COURSE — junker radios .. junker CBs — I pay postage.. I also go down to Ottawa at least
twice a year May to Rideau Lakes A.R.C. flea market and early Sept to CARP/Ottawa flea and I go to Parry
Sound flea market and also I have been attending the MILTON FLEA market.

I do have International customers who restore and tinker with older rigs and they come to me for parts
because I dont charge as much as the EBAY scalpers.
NOT WANTED Chinese FAKE parts. — I buy older collections of parts NON-China Counterfeits that (often) very poor


Short Wave/general Coverage receivers

Panasonic RF4900 double Superhet I have 2 of these. One is a junker unit that is mostly intact the other might be working (Im going to check it out soon)

DX160 also SX190 Realistic SWL/ham bands RX – I have a junked assembly to draw parts from SHORT WAVE receiver.

RADIO SHACK— SX190      AX190 — one of these works fine- the other I havent checked out yet
RADIO SHACK DX200 short wave and Broadcast band rx – not checked out yet — sitting on the shelf
Heathkig GR-78 smaller size solid state older swl and broadcast band

I have 2 FT757GX radios – one has more serious problems and the other one is intermittent problem. I might part one out.

FT301 – I have one Analog and another Analog on order that will be fixed up. I have several old digital units with various problems and I have
quite a few parts, knobs, crystals — ect.. crystals are $8 each USED tested. $2 postage across CANADA for small parts like crystals.
Cabinet parts I have some.

FT301 RELAY BOX and FT301 Phone patch — rare items – email me if u r interested

FT221R — I have the main one I use all the time.. and I have a spare parts unit. I might be able to help you out with parts on this one.

FT221R crystals — I have some crystals that are for the FT221 (low part of the 2 mtr band) – tested crystals $4 each inquire if interested

FT101zd — Digital readout problem.  I have actually started to part this one out. Someone wanted the Power Transformer out of it.
— so all the rest of the boards and parts ect are all recently (late Nov 2018) tested out and it is (or was) a working radio.

Front Panel of the FT101ZD is sold- many other parts are still available3.


FT290R – 2 meter multimode low power portable. This one works somewhat but seems like distortion problems – I want to try and fix it.

GONE: *** KENWOOD R 300 SHORT WAVE RECEIVER THIS ONE IS GONE – I traded it to USA ham for desoldering station (I do trades)


Trades possible: ie a box of good old semiconductors ect for a radio back in return – win win for the
both of us. my email is 73 earl ve3ab — Want pictures of the equipment..
just write ..I will send pics — I ALSO LIKE TO DICKER and work out deals.. 73 earl ve3ab


YOU CAN MEET ME AT THE FLEA MARKETS or along Hiway 17 from Elliot Lake, past Sudbury, North Bay, Pembrooke and down to Ottawa. I will be going down hiway 17 around May 7th (thereabouts) — I can hand carry radios/parts or pick up radios parts. I will be at the Smiths Falls (just west of Ottawa) flea market Saturday May 11th with a table in the commercial Vendors section. — You can get it touch with me for orders before hand.